316 Stainless Steel Bulkhead Union Double Ferrule Compression Connector 1/8 1/4 3/8 1/2 6 8 mm Pipe Fitting replace(0.5 inch LOK)

Size Meaning0.125 in -- 1/8"0.25 in -- 1/4"0.375 in -- 3/8"0.5 in -- 1/2"0.75 in -- 3/4"1 in -- 1"M means Male threadF means Female threadApplicationFor inert , reactive, flammable, oxidizing and corrosive gases and mixtures, Purity max. 6.0.Tube Fittings are appropriate but the implementation of certain standards mentioned below should be adhered to just as in other .1. Tubing hardness must be less than that of the ferrules.2. Tubing should be free of imperfections, defects and round in shape.3. Tubing ends must be cut squarely and perpendicular to the center-line of the tubing.4. After the tubing is cut it must be deburred on both the inside and outside with a fully sharpened deburring tool.Features1. Sizes range from 1/16" to 1" and 3 mm to 25 mm.2. Precision machined components perfect deformation of the ferrules and tubing.3. Hardened threads with smooth finish avoid galling and help to extend the fitting service life.4. Female nut threads are silver-plated to reduce the friction against the body threads.5. Radius junction design for elbows provides smooth flow path.6. Every fitting is marked with thread type, size and material.7. Assembled easily without the requirement of any special tools.8. Provide a reliable, leak proof seal under severe conditions such as temperature cycling, vibration and pulsation.9. Contribute to productivity improvement because of machined surfaces on the inner .Material316 Stainless Steel,Straight fittings are machined from bar stock and shaped fittings from forgings.Bar stock according to ASTM A276, ASME SA479, EN 1.4401Forgings according to ASTM A182, ASME SA182, EN 1.4401Thread SpecificationsPressure Rating for Pipe End ThreadAllowable pressure ratings for male and female threads are based on ASME B31.3 at ambient temperature.Installation Instruction1. Firmly insert the tubing until it bottoms in the fitting body.2. Finger tighten the nut.3. Mark the nut at the 6 o'clock position, with pencil or scribe.4. Hold the body with a backup wrench, or vice, then tighten nut.5. 1-1/4 turns to the 9 o'clock position.6. The above applies to all fittings from 1/4"to 1"(6mm to 25mm).7. Fittings from 1/16" to 3/16" (3mm to 4mm), only 3/4 turn is required.Cautions1. Do not loosen or tighten fittings when the system is pressurized.2. Make sure that the tubing rests firmly on the shoulder of the port.3. Always leave enough straight length of the tubing for the fittings.4. Always use an insert for extremely soft plastic tubing.5. Material of the metal tubing should be softer than that of the fitting.6. Keep the tubing end and clean and smooth.7. When assembling the tube fitting, hold the body with a wrench and turn the nut instead of holding the nut.8. When installing a valve with tube fitting end, hold the valve body with a wrench and turn the nut.9. When assembling the fitting to a valve with thread, hold the valve body with a wrench and turn the body of the fitting.CleaningAll fittings are free from machine oils, loose particles and grease throughout the close cleaning process.PackagingEach fitting is sealed bagged to component cleanliness and to them from environmental contamination.Each bid for 1 piece tube fitting.

• Design Hexagon Head Code:The hexagon head code offers enhanced grip and ease of installation for the fitting.
• Connection Female:Features a female connection, providing a secure, leak-proof seal for a variety of gases.
• Applicable Media , Air, Water:Versatile for use with, air, and water, this fitting caters to diverse fluid applications.
• Double Ferrule Compression Connector|Double Ferrule Compression|Material SUS 316:Crafted from premium SUS 316 stainless steel, this fitting resists in harsh environments.
• Working Pressure 3500 Psig:Withstands pressures up to 3500 Psig, ensuring reliable performance